Rode NTG2 Condenser Supercardioid Shotgun Recording Microphone + WS6 Windshield

Description

Rode NTG2 Multi-Powered Shotgun Microphone
The RØDE NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries.
Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (161gm/5.7oz without battery) makes it an ideal boom microphone.
In addition to the native 20Hz-20kHz frequency response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
The NTG2 operates either from a AA (1.5V) battery or P48 phantom power which can be supplied by professional cameras, audio recorders and power supplies. The battery power option makes the NTG2 ideal for scenarios where the camera does not supply phantom power such as DSLR video.
The WSVM windshield is supplied to minimise light wind noise and plosives during recording. The optional 'DeadCat' furry is recommended for outdoor applications.
The RØDE NTG2 shotgun microphone is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Features:
Broadcast sound quality
Low noise circuitry
Condenser transducer
Rugged metal construction
Two step High Pass Filter (Flat/80Hz)
P48 phantom power or AA battery option
Low handling noise
Low weight - 161g (5.17 oz.)
Includes mic clip, wind shield and zip case
Ideal for professional applications within the film, video, television and production industries
Rode WS6 Deluxe Windshield for NTG2 & NTG1 Microphones
The RØDE WS6 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones.
Designed to reduce wind noise when recording in adverse environmental conditions, the WS6 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area.
Suitable for the RØDE NTG-1, NTG-2 and VideoMic, as well as any shotgun microphone with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.
Specifications
Rode NTG2 Multi-Powered Shotgun Microphone
Acoustic Principle: Line Gradient
Active Electronics: JFET impedance convertor with balanced transformer output
Capsule: 0.50"
Polar Pattern: Supercardioid
Address Type: End
Frequency Range: 20Hz - 20kHz (selected HPF @ 0)
Output Impedance: 250Ω
Maximum SPL: 131dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level: 6.9dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity: -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted): 18dB-A
Power Options: AA battery powered; +48v phantom power required from mixer or interface
Weight: 161.00gm
Dimensions: 280.00mmH x 22.00mmW x 22.00mmD
Dimensions: 280.00mmH x 22.00mmW x 22.00mmD
Output: 3-pin XLR output
Rode WS6 Deluxe Windshield for NTG2 & NTG1 Microphones
Weight:: 50.00 gm
Dimensions:
100.00mmH x 100.00mmW x 185.00mmD